[TEST PATTERN]Displays the test pattern built-in to the projector.Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal beforeperforming various adjustments.1) Press as to select [TEST PATTERN].2) Press the button.f The test pattern with the [PATTERN CHANGE] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.All white → Color bars (vertical) → Color bars (horizontal) → White cross on the black background → Black cross onthe white background → Cross hatch → All white →...f When you press the [PROJECT SETUP].Notef The initial setting is All white. The initial screen is Cross hatch if you have assigned it to the button.[FILTER COUNTER]This function is used to reset the filter use time and set the notification display.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.[FILTER COUNTER] Displays the using time of the filter.[TIMER] Sets the timer when you want to display an alert message of filter replacement.[FILTER COUNTER RESET] Resets the filter counter.Setting [TIMER]1) Press as to select [TIMER].2) Press qw to switch the setting of the timer.f The items will switch each time you press the button.[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H] → [7000 H][FILTER COUNTER RESET]1) Press as to select [FILTER COUNTER RESET].2) Press the button.f The [FILTER COUNTER RESET] screen is displayed.3) Press qw to select [OK] and then press the button.[INITIALIZE ALL]Return various setting values to their factory default settings.1) Press as to select [INITIALIZE ALL].2) Press the button.f The [INITIALIZE ALL] screen is displayed.3) Press qw to select [OK] and then press the button.f The [POWER OFF.] screen is displayed.4) Press the button.f The operation is disabled except for turning off the power.Notef The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.f When [INITIALIZE ALL] is executed, [EMULATE] and the setting values of [NETWORK/USB] cannot be returned tothe factory default values. For details about the initialization of [NETWORK/USB], please refer to [NETWORK/USB] →[INITIALIZE]. (Æ page 97)84 - ENGLISHChapter 4 Settings - [PROJECTOR SETUP] menu