1) Press as to select [AMX D. D.].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] This function is disabled.[ON] This function is enabled.[Crestron Connected(TM)]Set to [ON] to control with Crestron Connected™ of Crestron Electronics, Inc.1) Press as to select [Crestron Connected(TM)].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] This function is disabled.[ON] This function is enabled.[EXTRON XTP]Set to [ON] when connecting the “XTP transmitter” of Extron Electronics to the terminal.Set to [OFF] If you want to connect to the optional Digital Interface Box (Model No.: ET-YFB100G).For details of the “XTP transmitter”, refer to the website of Extron Electronics.URL http://www.extron.com/1) Press as to select [EXTRON XTP].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] This function is disabled.[ON] This function is enabled.[DIGITAL INTERFACE BOX]When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the terminal, themain menu of ET-YFB100G is displayed. Refer to the Operating Instructions of ET-YFB100G for details.Notef When [EXTRON XTP] is set to [ON], [DIGITAL INTERFACE BOX] cannot be selected.[LIVE MODE CUT IN]Set this [ON] to allow interrupt of the Live mode by other users, or to allow delivery of images by the “Multi Projector Monitoring& Control Software”, while the Live mode is active (sending image) by the “Wireless Manager ME6.2”.1) Press as to select [LIVE MODE CUT IN].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] This function is disabled.[ON] This function is enabled.Notef If you use the “Wireless Manager ME6.2” and the “Multi Projector Monitoring & Control Software” on the same computer atthe same time, the function of delivering image to all may not be available. If you want to use them at the same time, pleaseuse another computer with respective software.[MULTI-LIVE]Switch to the Multi-live mode when using the “Wireless Manager ME6.2”. For details, refer to "Wireless Manager ME6.2"operating instructions. You can also use the application that is used for iOS or Android.1) Press as to select [MULTI-LIVE].2) Press the button.f To switch the multi mode.ENGLISH - 95Chapter 4 Settings - [NETWORK/USB] menu