|
Notef When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the terminal, theET-YFB100G input changes with each press of the button. The input can also be changed by using thecontrol command of RS-232C. For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector toDIGITAL LINK, and then switch the input on the twisted-pair-cable transmitter.Using the MEMORY VIEWER functionIt is possible to project the video and pictures which are stored in the USB memory when the USB memory inserted into theprojector.button1) Press the button on the remote control.f Switches the input to MEMORY VIEWER.Notef If you want to use this function, insert the USB memory directly into the terminal.f When [Miracast] or [Panasonic APPLICATION] is selected in [CONNECTION LOCK], [KEY NOT APPLICABLE] screen willbe displayed. (Æ page 93)Using the Miracast functionThis function is to project the displayed images on the Miracast-certified device to the projector through the wireless LANconnection.button1) Press the button on the remote control.f Switches the input to Miracast.Notef For details, see "About Miracast". (Æ page 125)f When [MEMORY VIEWER] or [Panasonic APPLICATION] is selected in [CONNECTION LOCK], [KEY NOT APPLICABLE]screen will be displayed. (Æ page 93)Using the Panasonic APPLICATION functionThis function can be used to project still images or video to the projector through the supplied software "Wireless ManagerME6.2" with CD-ROM. In addition, the iOS application and Android application can also make it possible.button1) Press the button on the remote control.f Switches the input to Panasonic APPLICATION, then the idle screen is displayed.Panasonic APPLICAION idle screen2) Press the button.f If you select [SIMPLE] in [WIRELESS LAN], the SSID and KEY will be displayed.48 - ENGLISHChapter 3 Basic Operations - Basic operations by using the remote control PreviousNext |