Panasonic SDR-S100 Operating Instructions Manual

Also see for SDR-S100: Operating instructions

Contents

102VQT0T60Trouble shooting (continued)Problem Check pointsThe scenes are notcorrectly displayed inthumbnails.≥ Scenes displayed asthumbnails in shades of blueand white cannot be playedback or deleted. If the scenesare unnecessary, format theSD card to erase the data.≥ Please be aware that if an SDcard is formatted, then all the data recorded on the cardwill be erased. Store important data on a PC, etc. Whensaving scenes recorded using this unit to a PC, youmust use MotionSD STUDIO. (P74)“PUSH THE RESETSWITCH.” is displayed.≥ The unit has automatically detected anerror. To protect the data, remove the SDcard and then press the [RESET] buttonwith the projecting part 1 of the handstrap. This will restart the unit. When youpress the [RESET] button, the date andtime setting will also be reset. Set thedate and time again.≥ Even after you press the [RESET]button, the indication may still appear repeatedly. If so,this unit needs repair. Detach the power connected, andconsult the dealer who you purchased this unit from. Donot attempt to repair the appliance by yourself.Even if connected by theUSB cable, this unit isnot recognized by thePC.≥ Have you installed the Web camera driver?> Install the driver, then check the connections.≥ Have you set this unit to the correct mode?> The unit is not recognized if it is set to motion pictureplayback mode. (P81)≥ Select another USB terminal on the PC.≥ Check the operating environment. (P76, 77)≥ Turn on the power to this unit.When the USB cable isdisconnected, an errormessage will appear on PC.≥ To disconnect the USB cable safely, double-click theicon in the task tray and follow the instructions on thescreen.The warning/alarmindication [°] appearswhen this unit is operatedin the WEB camera mode.≥ Did you press the record button or any other button?> You cannot record onto the card in the WEB camera mode.≥ Have you installed the Web camera driver?> Install the driver, then check the connections.The [ ] indicationflashes when this unit isconnected to a PC.≥ The unit is connected to a Windows XP PC in stillpicture playback mode.> Connect with a printer supporting PictBridge.The [ ] indicationappears when the unit isconnected to the printer.≥ The unit is connected to the printer in motion picturerecording mode or still picture recording mode.> Change the mode to still picture playback mode.SETUP PLAY1PictBridgeWEB