71VQT0T60Images recorded by this unit can be played back on a TV.¬ Insert an SD card with recordings into the unit.1 Open the terminal cover and thenconnect the multi cable (supplied) tothe multi-connector terminal [MULTI]and the TV.1 Multi cable (supplied)Insert the plugs as far as they will go.≥ If your TV is not equipped with AV InputSockets, the 21-pin Adaptor (optional) isnecessary. Consult your dealer.≥ If the TV has an S-Video terminal, then alsoconnect an S-Video plug. It allows you toenjoy more beautiful images.(You must also connect the Video/Audio inputterminals.)≥ Use the AC adaptor to free you from worryingabout the battery running down.2 Turn on this unit, then set the mode to[ ] or [ ].3 Change the input channel on the TV.Example: Set the channel to “VCR2” etc. (The channel set will differ depending on theterminal to which the cable is connected.)4 Start playback on this unit. (P58, 61)The image and audio are output on the TV.∫ If the image or audio from this unit is not output on the TV≥ Check that the plugs are inserted as far as they go.≥ Check the connected terminal.≥ You cannot playback motion pictures recorded to SD card on this unit by inserting theSD card into a TV with a built-in SD card slot.≥ Check the TV’s input setting (input switch). (For more information, please readthe operating instructions for the TV.)Playback on TV21-pin AdaptorMULTI[S-VIDEO IN][VIDEO IN][AUDIO IN]1PCPC
