97VQT0T60∫ About recoveryWhen the SD card was accessed, you tried to playback a scene displayed as a thumbnail inshades of blue and white (P102) or faulty control information or a play list created on anotherdevice was read, a control information recovery message or play list delete message such asthose shown below may be displayed. (After recovery starts, it may take time depending onthe error.);;YESWhen connecting to AC adaptor or theremaining capacity of the battery isenough:[FINISHED]When the remaining capacity of thebattery is low:[PLEASE CONNECT AC ADAPTOR ORCHANGE BATTERY.]NO[CANNOT USE THIS CARD IN VIDEOMODE WITHOUT REPAIRING DATAERROR.];YESWhen connecting to AC adaptor or theremaining capacity of the battery isenough:[FINISHED]When the remaining capacity of thebattery is low:[PLEASE CONNECT AC ADAPTOR ORCHANGE BATTERY.]NO[CANNOT USE THIS CARD IN VIDEOMODE WITHOUT REPAIRING DATAERROR.]≥ When you recover files or delete play lists, you can record or play motion pictures again.Therefore, be sure to follow the instruction.≥ When data recorded on another device is recovered, it may not be possible to play backthe data on this unit or the other device. Always use this unit to recover data recorded on it.≥ In the case that recovery fails, format the SD card with this unit (in still picture recordingmode or still picture playback mode) or MotionSD STUDIO (P74).REPAIRING CONTROL DATA. PLEASECONNECT AC ADAPTOR.DATA ERROR OCCURRED. REPAIR SDDATA NOW?YES/NOPLAYLIST ERROR. DELETE THISPLAYLIST?/PLAYLIST ERROR. DELETEALL PLAYLISTS?YES/NO
