32VQT0T60RecordingFirst, format the SD card if one which has been used on another device is going to be usedfor the first time on this unit. (P66) When the SD card is formatted, all of the recorded data(files) is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto aPC or other device before proceeding with the formatting. When copying images recordedusing this unit to a PC, you must use MotionSD STUDIO. (P74)This unit is compatible with wide-screen TVs (16:9) and set to wide mode at the time ofpurchase. To watch images on normal TVs (4:3), change the wide mode setting beforerecording (P41) or when playing back the images on the TV screen (P72).∫ Basic camera holding≥ Open the LCD monitor.Recording cannot start when the LCD monitoris closed. However, even if the LCD monitor isclosed during recording, the power does notturn off until recording is ended.≥ The angle of the LCD monitor can be adjustedto suit what you want to record.≥ We recommend attaching the hand strap 4(supplied) to prevent the camera from dropping.≥ Do not cover the White balance sensor 3 withyour fingers, etc.≥ Do not cover the lens, the front of the flash 1 or the built-in stereo microphone 2with your fingers.Check before recordingDepending on the TV connected,the sides of the images (the partoutside the dotted line) beingplayed may not appear. Werecommend widening the recordingrange of the objects you want torecord beforehand.1 16:9 screen2 4:3 screenThe clock is not set at the time of purchase. If the screen shows the incorrect date/time, then adjust it.1 215:4215:4215.12.200515.12.200515:4215:4215.12.200515.12.200516:9 4:31234
