12VQT0T6026 LCD monitor (P22, 108)27 Power LCD button [POWER LCD] (P31)28 Reset button [RESET] (P102)29 Card access lamp [ACCESS] (P16)30 Card slot open lever (P15)31 Card slot cover (P15)32 Strap fixture (P13)Lens hood1In order to remove the lenshood, rotate itcounter-clockwise.2In order to fit it, put into slot A,and then rotate it clockwise .≥ When fitting the tele conversionlens (VW-LT3714ME; optional) orthe wide conversion lens (VW-LW3707M3E; optional), first remove the lens hood.≥ When attaching the tele conversion lens (VW-LT3714ME; optional) or wideconversion lens (VW-LW3707M3E; optional), place this unit in a way so that it isstable such as lying down on its side.Tripod mountThis is a hole for attaching this unit to a tripod(optional). (Please carefully read the operatinginstructions for how to attach the tripod to the unit.)This unit does not have a hole for a tripod pin soattach it to a tripod without a tripod pin. If you try toforcibly attach this unit to a tripod with a fixed tripodpin, this unit may get scratched or damaged.≥ When a tripod is used, you can performoperations easily using the remote control.≥ When the tripod is used, the card slot cover andbattery cover cannot be opened. Insert an SD card or the battery before attachingthis unit to the tripod. (P15, 17)1 Camera baseParts identification and handling (continued)26273031322928Due to limitations in LCD productiontechnology, there may be some tiny bright ordark spots on the LCD monitor screen.However, this is not a malfunction and doesnot affect the recorded picture.
