The description below is the configuration of the priority stream that can transmit images without deterioratingthe image quality and refresh interval even when multiple users access concurrently.Priority stream[Activation]Select “On” or “Off” to determine whether or not to use the priority stream.• Default: OffNote• When “On” is selected for “Activation” of “Priority stream”, number of users who can access the cameramay be limited.[Destination IP address(1)]Enter the first destination IP address.[Destination IP address(2)]Enter the second destination IP address.[Stream type]Select “JPEG(1)”, “JPEG(2)”, “JPEG(3)”, “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)”.• JPEG(1): JPEG(1) images will be transmitted.• JPEG(2): JPEG(2) images will be transmitted.• JPEG(3): JPEG(3) images will be transmitted.• H.264(1): H.264(1) images will be transmitted.• H.264(2): H.264(2) images will be transmitted.• H.264(3): H.264(3) images will be transmitted.• H.264(4): H.264(4) images will be transmitted.• Default: JPEG(1)Note• When “Best effort” is selected for “Transmission priority” of “H.264”, bit rate will vary between themaximum and minimum rates while images are being transmitted.[Refresh interval*]Select the refresh interval from the following.This setting is validated only when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Stream type”.0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*• Default: 1fpsOperating Instructions 14315 Configure the settings relating to the authentication [User mng.]
