“*****.viewnetcam.com” and the current global address is automatically registered.If you are enrolled in “Viewnetcam.com”, the unique “domain name” (example: *****.viewnetcam.com) willbe allocated. The “Viewnetcam.com” service server automatically manages the domain name of cameraand the global address of router (or camera) when a camera automatically notifies the service server ofthe global address.Current global address is automatically registered via “*****.viewnetcam.com”.The “Viewnetcam.com” service server registers the global address and the domain name of router (orcamera) in the DNS server.Global address is obtained via the URL (domain name).By entering the URL (including the domain name) on the web browser when accessing the camera via theInternet, the DNS server identifies the registered global address of router (or camera).Access using the current global addressThe identified global address is used for accessing the router (or camera) to monitor images.Note• Refer to the contracted provider whether the current IP address is static or not.• Depending on the provider, local addresses may be allocated. In this case, the DDNS service isunavailable. Refer to the contract provider for further information.16.5.2 When using the “Viewnetcam.com” service[Personal(Camera) URL]The URL of the camera registered for “Viewnetcam.com”.[Your Account Link]When the displayed URL is clicked, the registration window for the “Viewnetcam.com” service will be displayedin a newly opened window.Register the information in the registration window to enroll in the “Viewnetcam.com” service.[Access interval]Select the interval to access the “Viewnetcam.com” service server to check the IP address and the host namefrom the following.10min/ 20min/ 30min/ 40min/ 50min/ 1h• Default: 1h[Global IP Address Notification Method]Typically [Global IP Address Notification Method] should be set to “Normal”.180 Operating Instructions16 Configuring the network settings [Network]
