7.2 Playback “H.264(1)”/“H.264(2)”/“H.264(3)”/“H.264(4)” images saved to the SD memory cardIMPORTANT• Depending on the network environment, download of video data may fail.ASlider barBy operating the slider bar, you can select where to start playing images from. The slider bar can only beused before playing images, or when playing is paused or stopped.[PAUSE] buttonPlayback will be paused when this button is clicked during playback.[PLAY] buttonWhen this button is clicked, recorded data will be played.Note• If audio is recorded, it can be played back, but the image and audio will not be synchronized. Therefore,images and audio may not always match. When data is being recorded to the SD memory card, audiomay sound as if it is cutting out and the audio quality may be reduced.• When recorded audio is played back, the refresh interval of live images and playback may becomeslow.• Recorded audio is not played back when “Off” or “Interactive(Half-duplex)” is selected for “Audiomode” on the [Audio] tab of the “Image/Audio” page.• Audio is only played for users who belong to the access level selected for “Permission level of audiotrans./recep.” on the [Audio] tab of the “Image/Audio” page.[FF] buttonEach time this button is clicked, the playback speed will change. When the [PLAY] button is clicked during fastplayback, playback speed will return to the normal playback speed.38 Operating Instructions7 Playback of images on the SD memory card