Note• Since the color compensation technology is used for “Auto3(Super Chrome Compensation(SCC))”,some colors may look different from the actual objects depending on the light condition (such as wheninfrared lights are used).• The operating sound might be heard when changing to black-and-white mode, however it does notindicate any malfunction.• When images are made darker by pressing the [-] (darker) [Brightness] button on the “Live” page,images may not automatically switch to black and white mode.[Day & Night(electrical)]SFx310SPN310Select switching between the color mode and the black & white mode from the following.• Off: The color mode is selected.• Auto: Switches from color to black-and-white images when the ambient brightness (illuminance) of thecamera is approx. 1.0 lx or less. It takes time to switch between modes.• Default: Off[Level]SFx311SPN311SPW311LSPW312LSPN531SPW531LSPW532LSelect the threshold illuminance level (brightness) to switch between the color mode and the black & whitemode.The descriptions about the following threshold illuminance levels are given when “Off” is selected for “SuperDynamic(SD)” or “Wide dynamic range (WDR)”.• High: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)of the camera is approx. 2 lx or less.• Low: Switches from the color mode to the black & white mode when the ambient brightness (illuminance)of the camera is approx. 1 lx or less.• Default: High[Dwell time]SFx311SPN311SPW311LSPW312LSPN531SPW531LSPW532LSelect a wait time for switching between the color mode and the black & white mode from the following.2s/ 10s/ 30s/ 1min• Default: 10s[IR LED Light]SPW311LSPW531LSPW312LSPW532LSelect whether or not to use the built-in IR LED light when in black-and-white mode, and select the intensityof the IR LED light from the following.• Off: IR LED light does not light.• Auto(High)/Auto(Mid)/Auto(Low): The IR LED light lights, and according to the luminance of the subject,the screen will automatically become brighter. “High”,“Mid”,and “Low” are indications of the IR LED lightintensity.• Default: Auto(High)Note• “IR LED Light” can be used when “On” or “Auto2(IR Light)” is selected for “Day & Night(IR)”.• Adjust the “IR LED Light” settings according to factors such as the setting conditions or distance fromthe subject.[Intensity control]SPW311LSPW531LSPW312LSPW532LWhen “On” is selected for “Intensity control”, the intensity is controlled so that subjects in images are notoverexposed.• Default: OnOperating Instructions 9311 Configure the settings relating to images and audio [Image/Audio]
