– TRM2: Alarm by alarm input to Terminal 2– TRM3: Alarm by alarm input to Terminal 3– VMD: Alarm by VMD alarm– COM: Alarm by command alarm– AUD: Alarm by audio detection alarm– FTP: Logs saved from FTP periodic image transmission errors• [SD memory card]: Available capacity and the original capacity of the SD memory card will bedisplayed.• [Delete] button: Click this button to delete the currently displayed log list. When using the SD memorycard, images associated with the log list will also be deleted.IMPORTANT• If there are too many recorded data files, it may take time to delete all of them. (When the totalsize is 1 GB, it may require about 1 hour.) Formatting the SD memory card can shorten thetime to delete all the data.• In the process of the deletion, “Alarm” and “Manual/Schedule” cannot be operated.• Do not turn off the power of the camera until the deletion is complete. When the power of thecamera is turned off in the process of the deletion, some images may remain on the SD memorycard. In this case, click the [Delete] button on the same log list window used to delete the logs.• [Download] button: Click this button to download all logs of the selected log list onto the PC.Note• The following settings may be required.Open Internet Explorer, click [Tools] ® [Internet Options] ® [Security] ® [Trusted Sites] ®[Sites]. Register the camera address on [Website] of the displayed trusted windows.After registration, close the web browser, and then access the camera again.• Up to 50,000 logs will be downloaded to the SD memory card. When more than 50,000 logsare filed, the older logs will be overwritten by the newer logs. In this case, the oldest log is thefirst to be overwritten.• [Close] button: Click this button to close the log list window.34 Operating Instructions6 Display the log list
