Note• When “Frame rate” or “Advanced VBR” is selected for “Transmission priority”, number of users whocan access the camera may be limited more (may become less than 10).[Frame rate*]Select a frame rate for H.264 images from the following.1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*/60fps*• Default: 30fps*Note• When “Frame rate”, “Advanced VBR”, or “VBR” is selected for “Transmission priority”, this setting isavailable.• “Frame rate*” is restricted by “Max bit rate (per client)*”. For this reason, the frame rate may be lowerthan the specified value when any value marked with an asterisk (*) is selected. When “VBR” is selectedfor “Transmission priority”, depending on the settings of “Max bit rate (per client)*” and “Imagequality”, transmission of images may periodically be paused. Check the transmission of images afterchanging settings.• H.264(1) will be fixed to 60fps when “2 mega pixel [16:9](60fps mode)” or “1.3 mega pixel [16:9](60fpsmode)” is selected for “Image capture mode”.[Burst tolerance level]Select how much the bit rate can exceed “Max bit rate (per client)*” by from the following.High/Middle/Low• Default: LowNote• This setting is only available when “Advanced VBR” is selected for “Transmission priority”.[Control time period]Select the time period that the bit rate will be controlled for from the following. Images are transmitted so thatthe average transmission rate during the selected period becomes the bit rate selected for “Max bit rate (perclient)*”.1h/6h/24h/1week• Default: 24hNote• This setting is only available when “Advanced VBR” is selected for “Transmission priority”.[Max bit rate (per client)*]Select a H.264 bit rate per a client from the following. When “Best effort” is selected for “Transmissionpriority”, set the maximum and minimum bit rates.64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/4096kbps*/ 6144kbps*/ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*/ 16384kbps*/ 20480kbps*/24576kbps*/ 30720kbps*/ 40960kbps*• Default:– H.264(1): 4096kbps*SPN531SPW531LSPW532L– H.264(1): 2048kbps*SFV311– H.264(2): 1536kbps*– H.264(3): 1024kbps*– H.264(4): 512kbps** The range of bit rates that can be configured for H.264 bit rates differs depending on the “Transmissionpriority” and “Image capture size”.82 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
