Note• When the registration for the “Viewnetcam.com” service is completed, the URL registered for“Personal(Camera) URL” is displayed. It may take up to about 30 minutes until the URL of the registeredcamera is validated.• To cancel the enrollment in the “Viewnetcam.com” service, access the “Viewnetcam.com” website(http://www.viewnetcam.com/) later.• When “Expired” is displayed in the URL of “Viewnetcam.com” in the viewnetcam settings page or thestatus page, restart the camera after registering the “Viewnetcam.com” service. After restarting thecamera, check that the registered URL is displayed in the URL of “Viewnetcam.com” of [Status] -[Viewnetcam.com] on the “Maintenance” page.• It is possible to check the information registered for the “Viewnetcam.com” service by accessing theURL displayed beside “Your Account Link”. When the URL is not displayed, check that the PC is beingconnected to the Internet, and click the [Set] button.• If access often fails due to the change in the global address of router, set a smaller value for “Accessinterval”.16.5.4 Checking the information registered for the“Viewnetcam.com” serviceIt is possible to check if the camera has been registered for the “Viewnetcam.com” service. (®page 193)16.5.5 When using “Dynamic DNS Update”[Host name]Enter the host name to be used for the Dynamic DNS Update service.• Available number of characters: 3 - 250 charactersEnter in the form of “(host name). (domain name)”.• Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and thehyphen (-).• Default: None (blank)Note• Refer to the network administrator for further information about the available host names.[Access interval]Select the interval to access the Dynamic DNS Update service server to check the IP address and the hostname from the following.10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h182 Operating Instructions16 Configuring the network settings [Network]
