19.3 Installing the manualsOn the CD launcher window, click the [Install] button next to [Manual] to display the Manual installation window.Confirm the following settings before starting the installation.ADECBSelect which manuals to install. The camera models that the manuals support are displayed in B “ModelList”.The camera models that are supported by the manuals selected in A are displayed here.Select where to create the manuals shortcut icon when the manuals are installed.Specify which folder on the PC to install the manuals to.Click the [Install] button to start the installation.Note• To uninstall the manuals delete the shortcut icon from where you specified it to be installed (the defaultis on the desktop) during installation and the [Manual] folder from the folder (the default is C:\Panasonic) you specified during installation.19.4 Installing the Viewer softwareThe Viewer software (Network Camera View 4S) must be installed on the PC in order to display camera images.On the CD launcher window, click the [Install] button next to [Viewer Software], and follow the instructionsdisplayed on the window to install the software. A message is displayed if a PC that does not have the Viewersoftware installed tries to access the camera. Install the software by following the instructions displayed on thewindow. Refer to page 3 for further information.Note• To uninstall the Viewer software, follow the steps below depending on the OS used on your PC.Delete [Network Camera View 4S] from [Control Panel] - [Programs] - [Uninstall a program].202 Operating Instructions19 Using the CD-ROM
