FTP[Alarm image FTP transmission]Select “On” or “Off” to determine whether or not to transmit the alarm image to the FTP server.• Default: Off[Directory name]Enter the directory name where the alarm images are to be saved.For example, enter “/ALARM” to designate the directory “ALARM” under the root directory of the FTP server.• Available number of characters: 1 - 256 characters• Unavailable characters: " & ;[File name]Enter the file name used for the alarm image to be transmitted to an FTP server. The file name will be asfollows.File name: [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serialnumber”• Available number of characters: 1 - 32 characters• Unavailable characters: " & * / : ; < > ? \ |[FTP transmission retry]Select “On” or “Off” to determine whether or not to resend failed FTP transmissions.On: If transmission fails, transmissions are resent until they are successfully sent.Off: If transmission fails, the image that failed to be sent is discarded and the next image is sent.Default: Off[Pre alarm]• Transmission intervalSelect the update interval of images before an alarm occurs from the following.0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps• Default: 1fps• Maximum number of imagesSelect the number of images to be transmitted from the following.0pics/ 1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics*/ 7pics*/ 8pics*/ 9pics*/ 10pics*/ 20pics*/ 30pics*/ 40pics*/50pics*• Default: 0 pics• Recording durationThe recording duration, which changes according to the configured “Transmission interval” and “Maximumnumber of images”, of images recorded before an alarm occurs is displayed.Note• When “JPEG(1)” is selected for the capture size of the image to be transmitted, pre alarm is unavailableif the image capture size of “JPEG(1)” is either “2048x1536”, “1920x1080”, or “1600x1200”.• When “On” is selected for “Image compression rate upon alarm detection”, only post alarm recordedimages are compressed. Compression is not applied to pre alarm recorded images.• When a selection with an asterisk (*) on the right of it is selected for “Maximum number of images” of“Pre alarm”, the specified number of images may not be able to be sent depending on the image capturesize and image quality. The following table shows the maximum number of images that can be sentfor pre alarm.Image quality0 1 2 3 4 5 6 7 8 9154 Operating Instructions16 Configuring the network settings [Network]
