Displaying System Information7-6 9161-A2-GH30-30April 1998View this field . . . To find the . . .For the FXS Voice APMPort Status Status of the port.Assigned To Interface the port is assigned to.Operating Mode Operating mode of the voice port that was configuredusing the Operating Mode configuration option on theVoice Ports screen. See theTechnical Reference forconfiguration information.Signaling Type Type of signaling used by the voice port that wasconfigured using the Signaling Type configuration optionon the Voice Ports screen. See theTechnical Referencefor configuration information.Call Progress Current condition of the port.TX ABCD bits Current value of the ABCD signaling bits that are beingtransmitted to the T1 interface.RX ABCD bits Current value of the ABCD signaling bits that are beingreceived from the T1 interface.T-R Control Current status of the tip and ring leads: RbTo. A – 48 Vdc battery is applied to the Ring leadand the Tip lead is opened RbTg. A – 48 Vdc battery is applied to the Ring leadand the Tip lead is grounded TbRg. A – 48 Vdc battery is applied to the Tip leadand the Ring lead is grounded Ring. Ringing voltage is applied between Tip andRingT-R Receive Status of what the attached device is doing with the Tipand Ring leads of the FXS port. Loop. Tip and Ring are connected together Rgnd. Ring lead is grounded by attached device Open. Ring lead is not connected to either the Tiplead or the groundTrunk Cond CGA Displays the status of trunk conditioning (On for CGA,Off for no CGA).
