Operation and Maintenance8-6 9161-A2-GH30-30April 19986. Follow this menu selection sequence, pressing Return after each selection:Configuration Edit/Display →AlarmThe Alarm Options screen appears.7. Select and set the following configuration options, as appropriate.To . . . Set the configuration option . . .Automatically initiate a call (dial out) Alarm & Trap Dial-Out to Enable.Retry the call if the call cannot becompleted Call Retry to Enable Dial-Out Delay Time to the desirednumber of minutes Alternate Dial-Out Directory to thedesired directorySpecify whether to disconnectimmediately after dialing out traps, or toallow a manual disconnect to occur. (Aconnection remains until manuallydisconnected.)Trap Disconnect to Enable.8. Press Ctrl-a to switch to the screen function key area.9. To save changes, select Save and press Return.10. Select the configuration area where you want to save the changes to andpress Return.When Save is complete, Command Complete appears at the bottom of thescreen.Maintaining COM Port DirectoriesTwo Control menu selections are dedicated to dialing a remote device formanagement:Select . . . To . . .COM Port Call Setup Select a phone directory and view its phone number, orto initiate and terminate external modem connectionsover the FrameSaver unit’s COM port. Used formanagement.COM Port Call Directories Change the phone number contained in a selecteddirectory when using an external modem.Displaying Directory NumbersUse the COM Port Call Setup screen to display the telephone number of theremote device.Main Menu →Control →COM Port Call Setup
