Displaying System Information7-79161-A2-GH30-30 April 1998Displaying Cross Connect StatusSlot assignments are made using the Cross Connect configuration option. SeeAssigning Cross Connections in Chapter 5,Setting Up, for making time slotassignments. Use the Cross Connect Status screen to display time slotassignments for: Network Channels DSX-1 Channels PortsDisplaying Network ChannelsUse the Network Channel Display screen to display DS0 assignments for eachDS0 on the network interface. This screen also provides information on the slotassignment for each NAM or APM type.Use the following menu sequence to display network channel information.Main Menu →Status →Cross Connect Status →Network Channel DisplaySelect the desired network interface: 1 for Network 1, 2 for Network 2 (only theModel 926x provides Network 2).The Network Channel Display screen displays 24 two-field entries in three rows.Together, each two-field entry defines the assignment for one Network interfacetime slot. The top field represents the time slot of the Network Interface. Thebottom field represents the cross connect status of the associated (top field)network time slot.The following information is available for viewing.The Network Time Slot Fields (top) . . . Indicates . . .N01 to N24 The Network Interface time slot (01 to 24).The Cross Connect Status Field(bottom) . . . Indicates . . .Unassgn The time slot is unassigned.SssPp The voice or sync data port (p) of slot (ss)is assigned to the Network Interface timeslot (01 to 24).Netn/yy Networkn (1 or 2) time slotyy is assignedto the Network Interface time slot (01 to24), using Clear Channel.Netn/yyr Networkn (1 or 2) time slotyy is assignedto the Network Interface time slot (01 to24), using Robbed Bit Signaling (r ).
