Parameter Reference C-193AC30 series Variable Speed DriveSetup WizardParameters::Device Manager::Setup WizardThese parameters configure the operation of the Setup Wizard.Parameter Name No. Path Default Range Units WritableEnable Auto Save 1738 Parameters::Device Manager::SetupWizardTRUE ALWAYSControl how parameter values are saved when modified via the GKP or the Web Page.TRUE: Parameter values are saved automatically when they are entered.FALSE: Parameter values are not saved automatically. To save parameters using the GKP navigate to the Welcome page bypressing the soft left key repeatedly, then press the save icon for approximately 1s. (Note: If the GKP password isactive and unlocked it will be necessary to lock the GKP password before the save icon is presented).Auto Hide 1779 Parameters::Device Manager::SetupWizardTRUE ALWAYSIn normal operation, parameters that are not relevant to the configuration are saved. For example, parameters relating to theThermistor IO option are only visible when that option is enabled. Clearing “Parameter Auto Hide” shows all parameters in the drive atENGINEER view level. At other view levels the Auto Hide feature is always enabled.Scaled PNO Access 1861 Parameters::Device Manager::SetupWizard0 0:BASE UNITS1:SELECTED UNITSALWAYSThis parameter may be used when the application makes use of selectable units, (for example: to display a value in either °C or °F).When Scaled PNO Access is “BASE UNITS” the value returned when reading a rescaled parameter over fieldbus communications isalways in the base, (unscaled), units. When Scaled PNO Access is “SELECTED UNITS” the value returned when reading a rescaledparameter over fieldbus communications is in the selected units.Language 1005 Parameters::Device Manager::SetupWizard0 0:ENGLISH1:FRANCAIS2:DEUTSCH3:ESPANOL4:ITALIANO5:CHINESE6:L 67:L 78:L 89:L 9STOPPEDIdentifies the currently selected language, refer to chapter 7, Graphical Keypad, for details on changing the selected language.
