14-158Chapter 14Appendix F: BRSInstallation ProcedureBRS Link ActivationIn accordance with 2.5 GHz standard, WinLink-BRS systems links mustbe activated before use. This is done at both ODUs independentlybefore installation on site. Both ODUs must be configured the same.To Activate a BRS Link1. Install WinLink Manager software as usual.2. When the Manager Main Screen is displayed it appears with theLink Status label red and showing Inactive. The Link Configurationand Link installation buttons are disabled.Figure 14-1: Inactive Manager Screen3. Click Configuration>Configure LocationThe Air Interface dialog box opens:
