Installing the LinkWinLink User and Installation Guide Version 1.750 3-42Installing the LinkDuring the installation procedure, the definition of all parameters isautomatically applied to both sides of the link.Note:For HSS screens see Appendix E: Hub Site Synchronization..Æ To install the link:1. Verify that there is IP connectivity between the managementstation/laptop and the IDU, and that the WinLink™ 1000 Managerapplication is running.2. With BRS systems you need to activate the link at both sites, seeAppendix F: BRS Installation Procedure for method. Once the linkis activated, continue installation from this point.3. In the toolbar, click the Link Installation button. The LinkInstallation button is only accessible if antennas are aligned. Alignantennas if this box is “grayed out”.The Installation wizard opens:Figure 3-9: Link Installation Wizard
