Selecting ChannelsWinLink systems later than version 1.300 have a feature calledAutomatic Channel Select, which allows you to define severalalternative frequency channels if interference is detected on thechannel in use.Note: For the ETSI version, skip to page 3-48; for the BRS version,skip to page 3-49.WinLink™ 1000 with Automatic Channel SelectAutomatic Channel Select (ACS) gives WinLink the ability to changefrequency channels automatically if interference is detected on thecurrent operating channel.Figure 3-13: Channel Select dialog box - Automatic Channel Select1. Select the main frequency from the Installation Channel menu.2. Select the required Channel Bandwidth 5, 10, or 20 MHz. Default is20 MHz.
