Managing Configuration FilesWinLink User and Installation Guide Version 1.750 5-98Managing Configuration FilesSaving Configuration in a FileThe management software allows you to save configurationparameters of the local and remote units on the management stationas an INI file. Each site is saved in a separate INI file.Æ To save the configuration in a file:1. Click Configuration from the main menu.2. Select which site to backup.The configuration dialog box opens.3. Click Backup.4. In the Save As dialog box, indicate in which folder and under whatname configuration file is to be saved, and click Save.Restoring a Configuration FileConfiguration files (*.ini) can be uploaded from the managementstation. Verified configuration files can be distributed to other unitsthat use the same configuration.Æ To restore a configuration file:1. From the Configuration menu, select the site to reconfigure.The Configuration dialog box opens.2. Click Restore.3. From the Open dialog box select *.ini file to upload and click OK.ResettingNote:Resetting the link causes service disconnection.In order to maintain the link configuration, reset the remote site first.Æ To reset the unit:1. From Maintenance, reset the remote unit.2. From Maintenance, reset the local unit.
