Technical SpecificationsWinLink User and Installation Guide Version 1.750 2-26NOTEBefore each installation you must use the Link Budget Calculator(Appendix H: Link Budget Calculator) to locate the supported rates andservices for your particular product.RegulationsWinLink operation complies with the radio and environmentalregulations listed in the following tables:Table 2-4: Radio RegulationsFCC 47CFR part 15 subparts B&C and E, part 27 and part 90IC RSS-210ETSI EN 300 328 and EN 301 893UK VNS 2107Australia AS/NZS 4771India WPCTable 2-5: Environmental RegulationsSafety EN 60950, IEC 60950, UL 60950, CAN-CSA C22.2 60950EMC EN 300 386, EN 301 489, EN 55022, EN 61000, EN 55024,AS/NZS CISPR 22, CAN/CSA-CEI/IEC CISPR 22-02, FCC47CFR class B part 15 sub-part BEnvironmental IEC 60721 class 4M5 IP67Ethernet ServicesThe WinLink LAN port provides 10/100BaseT interfaces with auto-negotiation and transparent VLAN support. Traffic handling is providedby a MAC level self-learning bridge. Ethernet services include:• 1 or 2 Ethernet interfaces in the indoor units• 10/100BaseT with auto-negotiation (IEEE 802.3)• Layer 2 Ethernet bridge• Self-learning of up to 2047 MAC addresses (IEEE 802.1Q)• Support of 1+1 applications (HUB/Bridge selectable mode)• Up to 18 Mbps symmetrical net throughput• VLAN transparent• Latency < 3msec
