Chapter 8: Device Management141HTTP and HTTPS Port SettingsYou are able to configure HTTP and/or HTTPS ports used by the KSX II.For example, if you are using the default HTTP port 80 for anotherpurpose, changing the port will ensure the KSX II does not attempt touse it.To change the HTTP and/or HTTPS port settings:1. Choose Device Settings > Device Services. The Device ServiceSettings page appears.2. Enter the new ports in the HTTP Port and/or HTTPS Port fields.3. Click OK.Entering the Discovery PortThe KSX II discovery occurs over a single, configurable TCP Port. Thedefault is Port 5000, but you can configure it to use any TCP port except80 and 443. To access the KSX II from beyond a firewall, your firewallsettings must enable two-way communication through the default Port5000 or a non-default port configured here.To enable the discovery port:1. Choose Device Settings > Device Services. The Device ServiceSettings page appears.2. Enter the Discovery Port.3. Click OK.Enabling Serial Console AccessTo enable serial console access:1. Choose Device Settings > Device Services. The Device ServiceSettings page appears.2. Select Enable Serial Console Access.3. Select the baud rate of the device.4. Click OK.
