Chapter 10: Maintenance211As noted, you may delete a custom profile from the system while it is stilldesignated as an active profile. Doing so will terminate any virtualmedia sessions that were in place.Handling Conflicts in Profile NamesA naming conflict between custom and standard USB profiles may occurwhen a firmware upgrade is performed. This may occur if a customprofile that has been created and incorporated into the list of standardprofiles has the same name as a new USB profile that is downloaded aspart of the firmware upgrade.Should this occur, the preexisting custom profile will be tagged as 'old_'.For example, if a custom profile called GenericUSBProfile5 has beencreated and a profile with the same name is downloaded during afirmware upgrade, the existing file will then be called'old_GenericUSBProfile5'.You can delete the existing profile if needed. See USB ProfileManagement (on page 210) for more information.Upgrading CIMsUse this procedure to upgrade CIMs using the firmware versions storedin the memory of your KSX II device. In general, all CIMs are upgradedwhen you upgrade the device firmware using the Firmware Upgradepage.In order to make use of USB profiles, you must use a D2CIM-VUSB orD2CIM-DVUSB with updated firmware. A VM-CIM that has not had itsfirmware upgraded will support a broad range of configurations(Windows®, Keyboard, Mouse, CD-ROM, and Removable Device) but willnot be able to make use of profiles optimized for particular targetconfigurations. Given this, existing VM-CIMs should be upgraded withthe latest firmware in order to access USB profiles. Until existingVM-CIMs are upgraded, they will be able to provide functionalityequivalent to the „Generic‟ profile.Note: Only D2CIM-VUSB can be upgraded from this page.To upgrade CIMs using the KSX II memory:1. Choose Maintenance > CIM Firmware Upgrade. The CIM Upgradefrom page opens.The Port (number), Name, Type, Current CIM Version, and UpgradeCIM Version are displayed for easy identification of the CIMs.2. Check the Selected checkbox for each CIM you want to upgrade.Tip: Use the Select All and Deselect All buttons to quickly select all(or deselect all) of the CIMs.
