Chapter 9: Security Management1952. Apply Encryption Mode to KVM and Virtual Media. When selected,this option applies the selected encryption mode to both KVM andvirtual media. After authentication, KVM and virtual media data isalso transferred with 128-bit encryption.3. For government and other high security environments, enable FIPS140-2 Mode by selecting the Enable FIPS 140-2 checkbox. SeeEnabling FIPS 140-2 (on page 196) for information on enablingFIPS 140-2.4. PC Share Mode. Determines global concurrent remote KVM access,enabling up to eight remote users to simultaneously log into one KSXII and concurrently view and control the same target server throughthe device. Click the drop-down list to select one of the followingoptions: Private - No PC share. This is the default mode. Each targetserver can be accessed exclusively by only one user at a time. PC-Share - KVM target servers can be accessed by up to eightusers (administrator or non-administrator) at one time. Eachremote user has equal keyboard and mouse control, however,note that uneven control will occur if one user does not stoptyping or moving the mouse.5. If needed, select VM Share Mode. This option is enabled only whenPC-Share mode is enabled. When selected, this option permits thesharing of virtual media among multiple users, that is, several userscan access the same virtual media session. The default is disabled.6. If needed, select Local Device Reset Mode. This option specifieswhich actions are taken when the hardware Reset button (at theback of the device) is depressed. For more information, seeResetting the KSX II Using the Reset Button. Choose one of thefollowing options:Local device resetmodeDescriptionEnable Local FactoryReset (default)Returns the KSX II device to the factorydefaults.Enable Local AdminPassword ResetResets the local administrator password only.The password is reset to raritan.Disable All LocalResetsNo reset action is taken.Note: When using the P2CIM-AUSBDUAL or P2CIM-APS2DUAL toattach a target to two KSX IIs, if Private access to the targets is required,both KVM switches must have Private set as their PC Share Mode.See Supported Paragon CIMS and Configurations (on page 275) foradditional information on using Paragon CIMs with the KSX II.
