Chapter 8: Device Management165To configure a Dell PowerEdge M1000e:1. If you selected Dell PowerEdge™ M1000e, auto-discovery isavailable. Configure the blade chassis as applicable. Prior toconfiguring a blade chassis that can be auto-discovered, it must beconfigured to enable SSH connections on the designated portnumber (see Device Services). Additionally, a user account with thecorresponding authentication credentials must be previously createdon the blade chassis.a. Switch Hot Key Sequence - Select the hot key sequence that willbe used to switch from KVM to the blade server. The Switch HotKey Sequence must match the sequence used by the KVMmodule in the blade chassis.b. Maximum Number of Slots - The default maximum number ofslots available on the blade chassis is automatically entered.c. Administrative Module Primary IP Address/Host Name - Enterthe primary IP address for the blade chassis. Required forauto-discovery moded. Port Number - The default port number for the blade chassis is22. Change the port number if applicable. Required forauto-discovery modee. Username - Enter the username used to access the bladechassis. Required for auto-discovery modef. Password - Enter the password used to access the bladechassis. Required for auto-discovery mode2. If you want the KSX II to auto-discover the chassis blades, select theBlade Auto-Discovery checkbox and then click the Discover Bladeson Chassis Now button. Once the blades are discovered, they will bedisplayed on the page.3. Change the blade chassis name if needed. If the chassis is alreadynamed, that information automatically populates this field. If it is notalready named, the KSX II assigns the chassis a name. The defaultnaming convention for the blade chassis by the KSX II is #Blade_Chassis_Port#.4. If operating in Manual mode, indicate the blades that are installed inthe blade chassis by checking the Installed checkbox next to eachslot that has a blade installed. Alternatively, use the Select Allcheckbox. If needed, change the blade server namesIf operating in Auto-discovery mode, the Installed box will display theslots containing blades during discovery.5. In the Blade Chassis Managed Links section of the page, you areable to configure the connection to a blade chassis web browserinterface if one is available. Click the Blade Chassis Managed Linksicon to expand the section on thepage.
