Chapter 3: Working with Target Servers56To power off a target server:1. From the KSX II Remote Console, click the Port Access tab to openit. The Port Access page opens.2. Click the port name of the appropriate target server. The Port Actionmenu appears.3. Choose Power Off. A confirmation message appears.Disconnecting KVM Target ServersNote: This item is not available on the KSX II Local Console. The onlyway to disconnect from the switched target in the Local Console is to usethe hot key.To disconnect a target server:1. Click the port name of the target you want to disconnect. The PortAction menu appears.2. Choose Disconnect.Tip: You can also close the Virtual KVM Client window by selectingConnection > Exit from the Virtual KVM menu.Choosing USB ProfilesWhen you connect to a KVM target server for the first time, as describedin Connecting to a KVM Target Server (on page 53), the preferredUSB profile for the port is automatically used. If you have connected tothe target server previously using a different profile, the USB profile fromthe last connection is used. You are alerted to the use of a profile otherthan the preferred profile by a warning similar to the following:
