Chapter 8: Device Management152Configuring Event Management - DestinationsSystem events, if enabled, can generate SNMP notification events(traps), or can be logged to syslog or audit log. Use the EventManagement - Destinations page to select which system events to trackand where to send this information.Note: SNMP traps will only be generated if the SNMP Logging Enabledoption is checked; Syslog events will only be generated if the EnableSyslog Forwarding option is checked. Both of these options are in theEvent Management - Settings page. See Event Management - Settings(see "Configuring Event Management Settings" on page 150).To select events and their destinations:1. Choose Device Settings > Event Management - Destinations. TheEvent Management - Destinations page opens.System events are categorized by Device Operation, DeviceManagement, Security, User Activity, and User Group Administration.2. Check the checkboxes for those event line items you want to enableor disable, and where you want to send the information.Tip: Enable or disable entire categories by checking or clearing thecategory line checkboxes, respectively.3. Click OK.To reset to factory defaults: Click the Reset To Defaults button.
