Chapter 8: Device Management148Configuring Date/Time SettingsUse the Date/Time Settings page to specify the date and time for theKSX II. There are two ways to do this: Manually set the date and time. Synchronize the date and time with a Network Time Protocol (NTP)server.To set the date and time:1. Choose Device Settings > Date/Time. The Date/Time Settings pageopens.2. Choose your time zone from the Time Zone drop-down list.3. To adjust for daylight savings time, check the "Adjust for daylightsavings time" checkbox.4. Choose the method you would like to use to set the date and time: User Specified Time - Choose this option to input the date andtime manually.For the User Specified Time option, enter the date and time. Forthe time, use the hh:mm format (using a 24-hour clock). Synchronize with NTP Server - Choose this option to synchronizethe date and time with the Network Time Protocol (NTP) Server.5. For the Synchronize with NTP Server option:a. Enter the IP address of the Primary Time server.b. Enter the IP address of the Secondary Time server. Optional
