Chapter 8: Device Management167b. Maximum Number of Slots - The default maximum number ofslots available on the blade chassis is automatically entered.c. Administrative Module Primary IP Address/Host Name - Notapplicable.d. Port Number - The default port number for the blade chassis is22. Not applicable.e. Username - Not applicable.f. Password - Not applicable.2. Change the blade chassis name if needed.3. Indicate the blades that are installed in the blade chassis bychecking the Installed checkbox next to each slot that has a bladeinstalled. Alternatively, use the Select All checkbox. If needed,change the blade server names.4. In the Blade Chassis Managed Links section of the page, you areable to configure the connection to a blade chassis web browserinterface if one is available. Click the Blade Chassis Managed Linksicon to expand the section on thepage.The first URL link is intended for use to connect to the blade chassisAdministration Module GUI.Note: Access to the URL links entered in this section of the page isgoverned by the blade chassis port permissions.a. Active - To activate the link once it is configured, select theActive checkbox. Leave the checkbox deselected to keep thelink inactive. Entering information into the link fields and savingcan still be done even if Active is not selected. Once Active isselected, the URL field is required. The username, password,username field and password field are optional depending onwhether single sign-on is desired or not.b. URL - Enter the URL to the interface. See Blade ChassisSample URL Formats (on page 180) for sample configurationsfor the Dell PowerEdge 1855/1955.c. Username - Enter the username used to access the interface.d. Password - Enter the password used to access the interface.Note: Leave the username and password fields blank for DRAC, ILO,and RSA web applications or the connection will fail.
