Chapter 8: Device Management168e. The Username Field and Password Field, which are bothoptional, contain the labels that are expected to be associatedwith the username and password entries. It is in these fields youshould enter the field names for the username and passwordfields used on the login screen for the web application. You canview the HTML source of the login screen to find the field names,not the field labels. See Tips for Adding a Web BrowserInterface (on page 172) for tips on adding a web browserinterface.5. USB profiles do not apply to Dell chassis.6. Click OK to save the configuration.IBM Blade Chassis ConfigurationSee Supported Blade Chassis Models (on page 175), SupportedCIMs for Blade Chassis (on page 176), and Required andRecommended Blade Chassis Configurations (on page 178) forimportant, additional information when configuring the blade chassis.1. Connect the blade chassis to the KSX II. See Step 3: Connect theEquipment for details.2. Select Device Settings > Port Configuration to open the PortConfiguration page.3. On the Port Configuration page, click on the name of the bladechassis you want to configure. The Port page will open.4. Select the Blade Chassis radio button. The page will then display thenecessary fields to configure a blade chassis.5. Select the IBM® blade chassis model from the Blade Server ChassisModel drop-down.To configure a IBM BladeCenter H and E:1. If you selected IBM BladeCenter® H or E, auto-discovery is available.Configure the blade chassis as applicable. Prior to configuring ablade chassis that can be auto-discovered, it must be configured toenable SSH connections on the designated port number (see DeviceServices). Additionally, a user account with the correspondingauthentication credentials must be previously created on the bladechassis. The KSX II only supports auto-discovery for AMM[1].a. Switch Hot Key Sequence - Predefined.b. Maximum Number of Slots - The default maximum number ofslots available on the blade chassis is automatically entered.c. Administrative Module Primary IP Address/Host Name - Enterthe primary IP address for the blade chassis. Required forauto-discovery mode
