Chapter 8: Device Management160To remove a rack PDU association:1. Select the appropriate rack PDU from the Power Strip Namedrop-down list.2. For that rack PDU, select the appropriate outlet from the OutletName drop-down list.3. From the Outlet Name drop-down list, select None.4. Click OK. The rack PDU/outlet association is removed and aconfirmation message is displayed.Target SettingsTo define target settings:1. In the Target Settings section, select 720x400 Compensation if youare experiencing display issues when the target is using thisresolution.2. Select 'Use international keyboard for scan code set 3' if connectingto the target with a DCIM-PS2 and require the use of scan code set 3with an international keyboard.
