Samsung DCS Technical Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 113 of 287 Updated I&M May 2002MMC 415: Report Trunk Abandon DataDESCRIPTION:Allows the system administrator or technician to enable or disable the reporting of abandoned CO calls forwhich CLIP information has been collected on a per trunk basis.There are two options for this MMC as follows.0 REPORT : NO Abandoned call records for incoming calls with CLIP information will not be printed onthe SMDR or stored in the system call abandon list.These records will continue to be stored in the station review list.1 REPORT : YES Abandoned call records for incoming calls with CLIP information will be printed on theSMDR or stored in the system call abandon list.These records will also to be stored in the station review list.Note :In order for abandoned call records to be printed on SMDR, MMC 725 SMDR Options, Option 11 PrintAbandoned Call Records must be set to YES.ACTION DISPLAY1 Press TRSF 415 [701] TRK ABNDNDisplay shows REPORT : YES2. Dial TRUNK number [704] TRK ABNDNOR REPORT : YESPress UP or DOWN to select trunk and useleft or right soft key to move cursor3. Dial 1 for YES OR Dial 0 for NO [704] TRK ABNDNOR REPORT : NOPress UP or DOWN to scroll through optionsand use left or right soft key toreturn to step 24. Press TRSF to store and exitORPress SPK to store and advance to nextMMCDEFAULT DATA : All TRUNKS will not report dataRELATED ITEMS: MMC 119 CLIP DISPLAYMMC 312 ALLOW CLIPMMC 608 ASSIGN REVIEW BLOCKMMC 722 STATION KEY PROGRAMMINGMMC 723 SYSTEM KEY PROGRAMMINGMMC 725 SMDR OPTIONSMMC 728 CLIP TRANSLATION TABLE