Samsung DCS Technical Manual
Also see for DCS: User guideProgramming manualQuick reference guideUser guideGuide
                                                                                                                                                                                                                                                                                               | |
SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 127 of 287 Updated I&M May 2002MMC 425: Assign CID TrunkDESCRIPTION:Assigns PSTN trunks to CID trunks. The options are Normal or CID (CLIP) TRUNK. Not forr DX408.NOTES:1. For the DCS it refers to CLIP rather than CID.2. DCS 70 hardware requirements are the 3TRK card and either the MISC1 or MISC2 card.3. DCS system require Version 5.X software or later.4. DCS hardware requirements are the 8TRK CID card and Expansion A1 card.5. DCS24 requirements are either 4TRK24 or 6TRK24 and SIM24 cardPROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRSF 425 [701] CID TRUNKDisplay show NORMAL TRUNK2. Dial Trunk number (eg.,707) [707] CID TRUNKNORMAL TRUNK3. Press UP or DOWN key to make selection [707] CID TRUNKPress RIGHT soft key to enter and return CID TRUNKTo step 1Press TRSF to store and exitORPress SPK to store and advance to nextMMCDEFAULT DATA: All Trunks set to NORMAL TRUNKRELATED ITEMS: MMC 119 SET CLIP DISPLAYMMC 728 ASSIGN CLIP TRANSLATION TABLE |
Related manuals for Samsung DCS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine