Samsung DCS Technical Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 130 of 287 Updated I&M May 2002MMC 428: Trunk/TrunkApplicable to all versions of the DCS 70 and DCS 24 software and to DCS version 6 software. Notapplicable to DX408.DESCRIPTION:Assigns which trunks can be used for outgoing calls in the case of DISA out calls or Trunk to Trunk transfercall from specific trunks on a per trunk basis. This is useful in the case of having many companies on onesystem.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1 Press TRSF 428 [701] USE [701]Display shows DIAL : YES2. Dial the Trunk number ( eg., 705) [705] USE [701]OR DIAL : YESPress UP or DOWN key to select station andpress RIGHT soft key to advance to step 33. Dial the trunk ID number ( eg., 704) [705] USE [704]OR DIAL : YESPress UP or DOWN key to select trunk andpress RIGHT soft key to advance to step 44. Press UP or DOWN key to select YES/NO [705] USE [704]option DIAL : NOORDial 1 for YES or 0 for NO and press RIGHTsoft key to move cursor to ANS optionPress UP or DOWN key to select YES/NO [705] USE [704]option DIAL : NOORDial 1 for YES or 0 for NO and pressRIGHT soft key to return to step 25. Press TRSF to store and exitORPress SPK to store and advance to nextMMCDEFAULT DATA: DIAL = Yes