Samsung DCS Technical Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 128 of 287 Updated I&M May 2002MMC 426: Trunk Gain ControlDESCRIPTION:Applicable to all versions of the DCS 70 and DCS 24 software and to DCS version 6 software.This MMC procedure allows trunk gain control to be modified.WARNING: The db levels should be left at default setting. Changing some of thesesetting may breach ACA requirements. Please contact LSP Tech Support beforemaking any changes.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALL (trunks)ACTION DISPLAY1. Press TRSF 426Display shows [701] TRUNK GAINRX : 0 dB TX : 0 dB2. Dial trunk number ( e.g., 704)ORPress UP or DOWN key to select trunk and press RIGHT softkey[704] TRUNK GAINRX : 0 dB TX : 0 dB3. Press UP or DOWN key to select trunk RX gain and pressRIGHT soft key [704] TRUNK GAINRX : +2dB TX : 0 dB4. Press UP or DOWN key to select trunk TX gain and pressRIGHT soft key [704] TRUNK GAINRX : +2dB TX : +2dB5. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: RX 0 dB, TX 0 dB for all trunksRELATED ITEMS: None