Samsung DCS Technical Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 70 of 287 Updated I&M May 2002MMC 304: Assign Extension/Trunk UseDESCRIPTION:Allow trunks the ability on a per-station basis to answer incoming Trunk calls, to dial out on Trunk or to doboth. If a station is set to NO Dial, the station will not have the ability to make a call. If the station is set to NOAnswer, the station cannot answer an incoming call on that Trunk.NOTE: MMC 406 Trunk Ring Assignment overrides this MMC for the Answer option.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1 Press TRSF 304 [201] USE [701]Display shows DIAL : YES ANS : YES2. Dial the station number ( eg., 205) [205] USE [701]OR DIAL : YES ANS : YESPress UP or DOWN key to select station andpress RIGHT soft key to advance to step 33. Dial the trunk ID number ( eg., 704) [205] USE [704]OR DIAL : YES ANS : YESPress UP or DOWN key to select trunk andpress RIGHT soft key to advance to step 44. Press UP or DOWN key to select YES/NO [205] USE [704]option DIAL : NO ANS : YESORDial 1 for YES or 0 for NO and press RIGHTsoft key to move cursor to ANS optionPress UP or DOWN key to select YES/NO [205] USE [704]option DIAL : NO ANS :YESORDial 1 for YES or 0 for NO and pressRIGHT soft key to return to step 25. Press TRSF to store and exitORPress SPK to store and advance to nextMMCDEFAULT DATA: DIAL = YesANS = YesRELATED ITEMS: MMC 406 Trunk Ringing AssignmentMMC 722 Station Key ProgrammingMMC 723 System Key Programming