Samsung DCS Technical Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 209 of 287 Updated I&M May 20025. If required, enter extender (eg., 03) [201] KEY PROG.OR 18 : NONE → GPIK 03Press UP or DOWN key to make selectionPress RIGHT soft key to return to step 26. Press TRSF to store and exitORPress SPK to store and advance to nextMMCDCS 70ACTION DISPLAY1. Press TRSF 722Display shows [201] KEY (MAST)01:CALL1 →2. Enter station number (e.g., 205)ORPress UP or DOWN key to make selection and pressRIGHT soft keyIf selected station has no AOM pair, go to step4[205] KEY (MAST)01:CALL1 →3. Enter 0 for MAST, 1 for AOM1 or 2 for AOM2.ORPress UP or DOWN key to make selection and pressRIGHT soft key[205] KEY (MAST)01:CALL1 →4. Enter key number (e.g., 18)ORPress UP or DOWN key to make selection and pressRIGHT soft keyORPress programmable button[205] KEY (MAST)18:NONE →_5. Using table above, press dial key pad number to makeselectionORPress UP or DOWN key to make selection and pressRIGHT soft key to advance cursor to step 5 to enterextender, if required, or to return to step 2[205] KEY (MAST)18:NONE →GPIK_6. If required, enter extender (e.g.,03)ORPress UP or DOWN key to make selection and pressRIGHT soft key to return to step 2[205] KEY (MAST)18:NONE →GPIK037. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: SEE BELOWRELATED ITEMS: MMC 107 KEY EXTENDER