Samsung DCS Technical Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 64 of 287 Updated I&M May 2002MMC 300: Customer On/Off per StationDESCRIPTION:Allows the following features to be enabled on a per-station basis.ACCESS DIAL Determines whether a station can select a trunk or trunk group by dialling its directorynumber (DN). This selection should be turned to off when using LCR.MICROPHONE Allows all keysets to be used in the speaker phone mode.OFF HOOK RING Will allow a short burst of ring tone to indicate another call.SMDR PRINT When SMDR PRINT is set to OFF, CO calls to and from this station will not be printedon the SMDR. This includes transferred calls or calls picked up from hold or park.TGR ADV.TONE When this feature is set to ON, a warning tone will be heard each time LCR advancesto the next routeVMAA FORWARD When this feature is set to ON, it will allow calls to be forwarded to voice mail.STN CALL PRT Allows print out station to station call.FWD DLY USE When this feature is set to ON, call is forwarded to No Answer Forward destinationeven if No Answer Forward status is set to OFF. Under this condition the originalcalled party still remains ringing status.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1 Press TRSF 300 [201] CUS. ON/OFFDisplay shows ACCESS DIAL : ON2. Dial station number (eg., 205) [205] CUS. ON/OFFOR ACCESS DIAL : ONPress UP or DOWN to select stationORPress ANS/RLS for all and press RIGHT soft [ALL] CUS. ON/OFFkey to move cursor and advance to step 3 ACCESS DIAL : ON3. Press UP or DOWN to select feature and [205] CUS. ON/OFFpress RIGHT soft key to move cursor and MICROPHONE : ONadvance to step 44. Press UP or DOWN to select ON/OFF and [ALL] CUS. ON/OFFpress RIGHT soft key ACCESS DIAL : OFF