Samsung DCS Technical Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG DCS PROGRAMMINGTECHNICAL MANUAL SECTIONPage 137 of 287 Updated I&M May 2002DISA NOANS DISC.:This timer controls the duration of time a DISA call is disconnected by force when calledparty does not answer.DISA PASS CHECK: This timer defines the time before the system clears the incorrect passcode counter.DISPLAY DELAY TIMER: This timer controls the duration a display is shown in the LCD display. This timeralso controls the duration of time that error tone is heard.DOOR LOCK RELEASE: This timer controls the time the door lock relay will be activated.DOOR RING DETECT: This timer controls the time the Door Phone button must be pressed before the call isrecognised by the DCS system.DOOR RING OFF TM: This timer controls the duration of ringing at the door ring destination beforeautomatically cancelling.E-HOLD RECALL TM: This timer controls the duration of time a call is held exclusively at a station beforerecalling.EXT. FWD DELAY TM: This timer controls the External Call Forward feature which determines the duration astation will ring before the call externally forwarded.FIRST DIGIT TIME: This timer controls how long the system will wait for dialling to begin before dropping thedial tone and returning the user to error tone.HOK FLASH MAX TM: This timer monitors the duration of a hookswitch flash from an SLI Port to ensure theflash is valid and is not line noise or an accidental hookswitch bounce (LONGEST DURATION).HOK FLASH MIN TM: This timer monitors the duration of a hookswitch flash from an SLI Port to ensure theflash is valid and not line noise or an accidental hookswitch bounce (SHORTEST DURATION).HOOK OFF TIME: This timer controls the time before dial tone is sent to a single line station.HOOK ON TIME: This timer sets the minimum amount of time that the system will recognise as an SLT hangup.INQUIRY RELEASE: This timer monitors the duration of the interaction of the soft key to determine when toreturn the LCD back to a normal status. This timer affects only display phones.INTER DIGIT TIME: This timer controls the grace period between dialling valid digits before dropping the calland returning the user back to error tone.KMMC DIGIT TIME: This timer controls the maximum period between programming actions while in aprogramming session. When the timer expires, the DCS system automatically returns the system to secureprogramming status.LCR ADVANCE TIME: This timer controls the duration of time before selecting the next allowable route whena station is allowed to route advance.LCR INTER DIGIT: This timer controls the period between dialling valid digits before dropping the call andreturning the user back to error tone.MCL DELAY TIME: This timer controls the time when the system should start transmitting Authorisationcode after sending MCL Access code.OFF HOOK RING: This timer controls the duration of time between ring bursts to a user who has a camped-on call.OFF HOOK SELECT: This timer controls the period before placing a internal/external call as programmed inMMCs 306 and 307.