Sanyo PLC WM5500L Owner's Manual

Contents

1① ON/STAND-By buttonTurn the projector on or off (pp.23-24).② MENU buttonOpen or close the On-Screen Menu (p.25).⑤ Point ▲▼◄► ( VOLUME – / + ) buttons– Select an item or adjust the value in the On-Screen Menu (p.25).– Pan the image in Digital zoom + mode (p.43).– Adjust the volume level (with Point ◄► buttons)(p.28).⑩ WARNING TEMP indicatorBlink red when the internal temperature of theprojector exceeds the operating range (pp.72,79-80).④ SHUTTER buttonClose and open up the built-in shutter. (p.27)⑧ POWER indicator– Light green while the projector is in stand-by mode.– Light green during operations.– Blink green in the Power management mode (p.59).③ SELECT button– Execute the selected item (p.25).– Expand or compress the image in the Digitalzoom mode (p.43).⑨ LAMP indicatorLight red during operations.⑬ LAMP REPLACE indicatorLight orange when the projection lamp reachesits end of life (pp.69, 80).⑪ WARNING FILTER indicator– Blink slow when the filter is being scrolled(pp.66, 79).– Blink fast when the filter scroll is not workingproperly or the filter cartridge is not installed(pp.66, 81).– Light orange when the clogging of the filter isdetected or the filter counter reaches a timeset in the timer setting, urging immediatefilter/ filter cartridge replacement (pp.65, 66,81).①Side Control Indicators (on the top panel)Part Names and Functions⑦ INPUT buttonSelect an input source (pp.33-35).⑥ LENS buttonEnter the focus, zoom, and lens shift adjustmentmode (p.27).②④ ⑥③⑤⑦ ⑨⑧⑩⑪⑫⑬⑫ SHUTTER indicatorLight blue when the shutter is closed (p.79).Side Control and Indicators