79Check the indicators for the projector condition.IndicatorsProjector ConditionPOWERgreenLAMPredWARNINGTEMP.redWARNINGFILTERorangeSHUTTERblueLAMPREPLACEorangeThe projector is off. (The AC power cord is unplugged.)The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector.The projector is operating normally.(The shutter is open)The projector is operating normally.(The shutter is closed)The projector is preparing for stand-by or the projectionlamp is being cooled down. The projector cannot beturned on until cooling is completed and the POWERindicator lights green.The projection lamp is being cooled down in the Powermanagement mode.The projector is in the Power management mode.The projection lamp is being cooled down in the Shuttermanagement mode.The projector is in the Shutter management mode.Press the ON/STAND-BY button to turn on theprojector.The filter is scrolled using the FILTER button on theremote control or the Filter control function in thesetting menu. When the filter is being scrolled, the Filterreplacement icon and Please wait message (Fig. 1)appear on the screen for about 30 seconds.The projector is operating normally• • • on• • • off• • • blinking at the normal rate(approx. 1 second ON,1 second OFF)• • • dim • • • blinking slow(approx. 2 seconds ON, 2seconds OFF)AppendixFig 1 Filter replacement icon and Please wait .• • • on (blue)❊ ❊ • • • blinking at the normal rate (blueand dim red) (approx. 1 secondON, 1 second OFF)❊ • • •blinking fast (blue and dim red)(approx. 0.5 seconds ON, 0.5seconds OFF)• • •blinking fast(approx. 0.5 seconds ON, 0.5seconds OFF)• • • on (red)❖❖ • • • dim (red)❖❖❖❖❖• • • Differ according to conditions.Indicators and Projector Condition❊❊❊❖❖❖