45If the projector cannot reproduce proper video image, select aspecific broadcast signal format from among PAL, SECAM, NTSC,NTSC 4 4, PAL-M, and PAL-N.The projector automatically detects an incoming video signal, andadjusts itself to optimize its performance.When the Video System is 105i, 100i or 100p, select thesystem manually.If the projector cannot reproduce proper video image, select aspecific component video signal format from among 40i, 575i,40p, 575p, 70p, 105i, 100i, and 100p.Video jack or S-video jackThe projector automatically detects an incoming video system, andadjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select the systemmanually.Video Input1 AV System Menu (Video or S-video)AV System Menu (y, Pb/Cb, Pr/Cr)Press the MENU button to display the On-Screen Menu. Usethe Point ▲▼ buttons to select Input and then press the Point► or the SELECT button.Use the Point ▲▼ buttons to select System and then press thePoint ► or the SELECT button. Use the Point ▲▼ buttons to select the desired system andthen press the SELECT button.Note:The AV System Menu cannot be selected when selectingRGB (Scart).Video System SelectionAutoy, Pb/Cb, Pr/Cr jacksPAL/SECAM/NTSC/NTSC4 4/PAL-M/PAL-NAutoy, Pb/Cb, Pr/Cr SIGNAL FORMAT