5When the video input signal is connected to theY-Pb/Cb-Pr/Cr jacks, select y,Pb/Cb,Pr/Cr.When the video input signal is connected to theVIDEO jack, select Video.When the video input signal is connected to theS-VIDEO jack, select S-video.When connecting to video equipment, select the type of Video sourcein the Source Select Menu.When the video input signal is connected to theY-Pb/Cb-Pr/Cr jacks, select y,Pb/Cb,Pr/Cr.When the video input signal is connected to theVIDEO jack, select Video.When connecting to video equipment, select the type of Video sourcein the Source Select Menu.Videoy,Pb/Cb,Pr/CrVideoS-videoInput SelectionWhen connecting to video equipment, select the type of Videosource in the Source Select Menu.INPUT 1 MENUHDMIRGB(Scart)When scart video equipment is connected to the INPUT 1(ANALOG) terminal, select RGB (Scart).When the video signal is connected to the HDMI terminal,select HDMI.INPUT MENUINPUT MENUy,Pb/Cb,Pr/Cr1Press the MENU button to display the On-Screen Menu. Usethe Point ▲▼ buttons to select Input and then press thePoint ► or the SELECT button.Use the Point ▲▼ buttons to select the desired input andthen press the Point ► button to access the submenu items.Use the Point ▲▼ buttons to select the desired source andthen press the SELECT button.Video Input Source SelectionMenu OperationNote:• When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks,Y,Pb/Cb,Pr/Cr takes precedence of RGB.• Y,Pb/Cb,Pr/Cr input can accept the component signal and the analogRGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/Cr input source, set to RGB input manually.WHEN SELECTING INPUT 1 (COMPUTER INPUTTERMINALS )WHEN SELECTING INPUT (5 BNC INPUT jACKS )WHEN SELECTING INPUT (AV TERMINALS )