Sanyo PLC WM5500L Owner's Manual

Contents

9Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you tomake the desired operation quickly without calling up the On-Screen Menu.Press the ZOOM buttons on the remote control to zoom in and outthe image.ZOOM buttonsPress the FOCUS buttons on the remote control to adjust focus ofthe image.FOCUS buttonsSee page 27 for details.LENS SHIFT buttonRemote ControlD ZOOMbuttonSHUTTERbuttonAUTO PCbuttonZOOMbuttonsFOCUSbuttonsLENS SHIFTbuttonNote:See the next page for the description of otherbuttons.INFO buttonBasic OperationSHUTTER buttonSee page 27 for details.SCREENbuttonINFO buttonPress the AUTO PC button on the remote control to operate theAuto PC adj. function. The computer screen adjustment can bedone easily by pressing this button. See page 37 for details.AUTO PC buttonPress the SCREEN button on the remote control to select the desiredscreen size. The selected screen size symbol appears on the screenfor 4 seconds. See pages 42 to 44 and 49 to 50 for details.Press and hold the SCREEN button for more than 5 seconds toreturn all the screen size adjustment setting to the factory defaultsetting.SCREEN buttonPress the D.ZOOM button on the remote control to enter to theDigital zoom +/– mode. See page 43 for details.D ZOOM buttonInformation display can be used to confirm the current operatingcondition of the projector and the signal being projected throughthe projector.Press the INFO. button on the remote control to display theinformation window on the screen. To hide the informationwindow, press the INFO. button again.The information window can also be selected from themenu.Operating with Remote ControlInformation MenuNote:• The H-sync freq. and V-sync freq. values described in thefigure may be different from the actual values.• SERIAL NO. is used to service the projector.