Sanyo PLC WM5500L Owner's Manual

Contents

60SettingWhen this function is set to On, the projector will be automaticallyturned on just by connecting the AC power cord to the wall outlet.Note:Be sure to turn off the projector properly (see “Turning Offthe Projector” on page 24). If the projector is turned off inthe incorrect sequence, the Direct on function does not workproperly.You can emphasize a part of the projected image with this function.Use the Point ▲▼ buttons to select a pattern of the Pointer (Arrow,Finger, or Dot). (p.32)This function allows you to change the presentation of the P-timerand execute it.Select one of the following options:Count up ............. The P-timer display 000:00 appears on thescreen and the count starts (000:00–10:00)Count down ........ The time set in the Timer setting appears on thescreen and the countdown starts.Timer.................... Use the Point ▲▼ buttons to set the Timer(1–10 Min). Only set to Count down, Timer isactive. Factory default velue is 10 Min.Start ..................... It executes the count up or count downfunction. Press the SELECT button at Start,Start changes to Stop in the Screen Menu. Atthat time, press the SELECT button at Stopto stop Count up or Count down, and Stopchanges to Restart in the Screen Menu. Pressthe SELECT button at Restart to resumeCount up or Count down.Reset ................... Reset the P-timer values.Press the SELECT button at Reset to return tothe following value;Count up ... "000:00"Count down ... Timer that you setExit ....................... To exit the P-timer operation.Stop or Cancel the P-timer via Remote ControlTo stop the P-timer, press the P-TIMER button.To cancel the P-timer, press and hold the P-TIMER button for a fewseconds.P-TIMERP-timer displayDirect onPointerP-timer